对流扩散方程的QC3无网格法

对流扩散方程作为偏微分运动方程的分支,在流体力学、气体动力学等领域有着重要应用.为解决对流扩散方程难以通过解析法得到解析解的难题,采用二阶一致3点积分(Quadratically Consistent 3-Point Integration,简称QC3)提高无网格法的计算效率,通过对积分点上形函数导数的修正,改善无网格法的精度和收敛性.本文将QC3无网格法拓展到对流扩散方程问题中,时域离散采用广义特征线Galerkin法,空间离散采用QC3法.数值结果表明,应用QC3无网格法得到的对流扩散问题数值解与解析解十分接近,验证了QC3无网格法解决对流扩散问题的可行性.     

Semiconvergence analysis of the randomized row iterative method and its extended variants

The row iterative method is popular in solving the large‐scale ill‐posed problems due to its simplicity and efficiency. In this work we consider the randomized row iterative (RRI) method to tackle this issue. First, we present the semiconvergence analysis of RRI method for the overdetermined and inconsistent system, and derive upper bounds for the noise error propagation in the iteration vectors. To achieve a least squares solution, we then propose an extended version of the RRI (ERRI) method, which in fact can converge in expectation to the solution of the overdetermined or underdetermined, consistent or inconsistent systems. Finally, some numerical examples are given to demonstrate the convergence behaviors of the RRI and ERRI methods for these types of linear system.     

发动机机油滤清器虑层强度分析及优化

针对机油滤清器工作工况下进出口压差、机油滤层强度及导流桩高度等问题, 通过试验测试与仿真相结合, 对滤清器初步设计进行了评估及优化, 以确保滤清器在工作工况下进出口压降及滤层强度能满足要求. 首先进行滤层性能试验, 得到滤层的惯性阻力系数和黏性阻力系数; 再通过滤层多孔介质CFD分析, 对滤清器进出口压降进行分析计算. 结果表明: 在-18℃、25℃和70℃的工况下, 进出口压降都小于10kPa, 满足相关要求. 针对滤层的最大主应力超过其抗拉强度的问题, 通过CAE仿真分析, 优化滤层与导流桩间隙, 将滤层最大主应力由110.1MPa降至36.99MPa, 小于其抗拉强度42.8MPa.     

Rational Design of Two-Dimensional Magnetic Chromium Borides Based on First-Principles Calculation

Two-dimensional(2D) magnetic materials have been experimentally recognized recently,however,the Curie temperatures(TC) of known 2D systems are quite low.Generally,magnetic systems can be seen as constituent magnetic elements providing spins and the non-magnetic elements providing frameworks to host the magnetic elements.Short bond lengths between the magnetic and non-magnetic elements would be beneficial for strong magnetic interactions and thus high TC.Based on this,we propose to combine the magnetic element Cr and the non-magnetic element boron to design novel 2D magnetic systems.Using our self-developed software package IM2 ODE,we design a series of chromium-boride based 2D magnetic materials.Nine stable magnetic systems are identified.Among them,we find that CrB4-Ⅰ,CrB4-Ⅱ and CrBs-Ⅰ with common structural units [CrB8] are ferromagnetic metals with estimated TC of 270 K,120 K and 110 K,respectively.On the other hand,five CrB3 phases with structural units [Cr2B12] are antiferromagnetic metals.Additionally,we also find one antiferromagnetic semiconductor CrB2-Ⅰ.Our work may open new directions for identifying 2D magnetic systems with high TC.     

Highly Stable Univalent Copper of a Cu@Al/SBA-15 Nanocomposite Catalyzes the Synthesis of Fluorescent Aminobenzotriazoles Derivatives

With the development of green chemistry, it is still a challenge to maintain the unstable valence state of the metal in heterogeneous catalysts and realize new catalytic synthesis methods. In this paper, it is reported that an univalent copper nanocomposite (Cu@Al/SBA-15) can efficiently catalyze the formation of novel amino-containing benzotriazoles with great fluorescence properties in a new synthetic strategy. Subsequently, its application is further verified by an acylation reaction to produce a series of novel benzotriazoles derivatives with high yield. It is worth noting that the Cu@Al/SBA-15 nanocomposites not only enable the reaction completed with high yield in a short time, but can also be recycled many times without a significant reduction in activity, and the leaching of copper and aluminum species in reaction system is negligible. Finally, the detailed and feasible reaction mechanism is also provided.     

基于Green-Naghdi模型与三相延迟模型的耦合热弹性波传播

研究了基于G-N模型与三项延迟模型的热弹性波的传播特征.在各种广义热弹性理论中,热位移概念的引入使得G-N模型具有独特性质而引起广泛的关注和应用.基于G-N模型,最近一个三相延迟模型被提出.主要研究了这两种模型下第一和第二声波(耦合热弹性波)的色散和衰减特性,分析了温度场和位移场在两种模型下的振幅比和相位差.结果发现三相延迟模型更为通用和灵活,应得到更多的关注与应用.     

基于贝叶斯参数优化的无模型自适应硅单晶直径控制

直拉硅单晶的生长过程涉及多场多相耦合与复杂的物理化学变化,其中工艺参数的波动是导致晶体直径不均匀的重要原因,如何实现工艺参数的控制以获得理想的、均匀的晶体直径具有重要的研究意义。本文分析现有控制方法存在不稳定以及控制效果不佳的问题后,提出基于贝叶斯参数优化的无模型自适应控制模型来控制硅单晶生长过程中的晶体直径。首先以坩埚上升速度与加热器的功率作为控制输入参数,晶体直径作为输出,搭建无模型自适应控制模型,并分析算法的稳定性。其次将控制模型进行仿真实验,发现硅单晶直径控制模型中不同的超参数设定会影响控制过程的迭代次数以及控制效果。最后,利用贝叶斯优化超参数的取值范围,并进行最终的仿真实验,结果表明,经贝叶斯参数优化后的控制模型计算快、迭代次数少,输出的晶体直径稳定,同时将生长工艺参数控制在实际生产要求范围内。因此,基于贝叶斯参数优化的无模型自适应控制实现了硅单晶直径均匀稳定的有效控制,具有结合工程背景的实际应用前景。     

n型IBC太阳电池选择性发射极工艺研究

为提升n型叉指背接触(IBC)太阳电池的光电转换效率,采用丝网印刷硼浆和高温扩散的方式形成选择性发射极结构,研究了硼扩散和硼浆印刷工艺对电池发射极钝化性能和接触性能的影响。实验结果表明,在硼扩散沉积时间和退火时间一定的条件下,硼扩散通源(BBr₃)流量为100 mL/min,沉积温度为830 ℃,退火温度为920 ℃时,发射极轻掺杂(p⁺)区域的隐开路电压达到710 mV,暗饱和电流密度为12.2 fA/cm²。发射极局部印刷硼浆湿重为220 mg时,经过高温硼扩散退火,重掺杂(p⁺⁺)区域的隐开路电压保持在683 mV左右,该区域方块电阻仅46 Ω/□,金属接触电阻为2.3 mΩ·cm². 采用该工艺方案制备的IBC电池最高光电转换效率达到24.40%,平均光电转换效率达到24.32%,相比现有IBC电池转换效率提升了0.28个百分点。     

基于模糊综合评判的大学数学考核方式改革

独立高校数学课程的开设旨在让学生掌握数学知识的基础上,提高数学应用能力.然而现行的考核方式存在重考试结果,轻学习过程等问题.从传统考核方式入手,指出其不足之处,基于模糊综合评判法建立新型评价体系和数学模型,通过试点运行验证了新的考核方式的可行性、客观性、合理性和科学性.     

Design and fabrication of GeAsSeS chalcogenide waveguides with thermal annealing

We reported a chalcogenide glass-based rib waveguide fabricated using photolithography and dry etching method. A commercial software(COMSOL Multiphysics) was used to optimize the waveguide structure and the distribution of the fundamental modes in the waveguide based on the complete vector finite component. We further employed thermal annealing to optimize the surface and sidewalls of the rib waveguides. It was found that the optimal annealing temperature for Ge As Se S films is 220℃, and the roughness of the films could be significantly reduced by annealing. The zero-dispersion wavelength(ZDW) could be shifted to a short wavelength around ~2.1 μm via waveguide structural optimization, which promotes supercontinuum generation with a short wavelength pump laser source. The insertion loss of the waveguides with cross-sectional areas of 4.0 μm×3.5 μm and 6.0 μm×3.5 μm was measured using lens fiber and the cut-back method. The propagation loss of the 220℃ annealed waveguides could be as low as 1.9 d B/cm at 1550 nm.